Installation Information
  HOME / INSTALLATION INFORMATION
            
   
The back of Classic Stone veneers may require a filler type adhesive for some applications. For wet environments epoxies, polyester resin and water proof adhesives are the best candidate. Contact adhesives are not recommended due to the uneven backing of Classic Stone . Do not use where the substrate is a moisture barrier when using non-catalyzing (water vapor type) cure adhesives. Adhesive may not adhere properly if applied between non-porous materials.
 

LAYOUT PATTERNS

Preparation of the area to be covered and the layout of the Classic Stone veneer sheets is the same as for natural stone or tile. Time spent preparing the work area will pay off immensely. A preliminary dry fit of Classic Stone allows for arrangements and orientation of individual sheets, patterns, textures, and colors before final placement. It is recommended that each sheet be dry fit exactly where it will be placed on horizontal or vertical surfaces. Numbering the sheets to track relocation before cutting and trimming is recommended and will save time.

CUTTING

Cutting straight lines and curves is best done using long nosed tin snips. Classic Stone can also be cut with a metal shear, wet saw, or table saw with carbide blade.

SEALERS

It is best to pre-seal Classic Stone veneer sheets prior to installation. This protects and seals the face from adhesives and grout during installation and handling. Classic Stone can be sealed with the same sealers used for slate, stone tiles, and wood. There are many sealers on the market with various recommended applications. Please test any sealer for the desired luster and penetration required prior to installation.

ADHESIVES

Know your adhesives; by understanding the specifics of the adhesive, a good deal of time and cost can be saved. All adhesives should be tested prior to any installation including consideration of moisture and temperature in the planned environment. If the application is outdoors, consideration to thermal expansion needs to be taken into account. Since Classic Stone is a veneer it must expand and contract with the substrate or delamination may occur. Where adhesive primers are recommended the bond should be tested by the installer before final installation
 
RECOMMENDED ADHESIVES
 
Heavy duty construction adhesive
SOLVENT FREE FRP adhesive
Premixed grout and tile adhesive
Acrylic copolymer based tile adhesive
Polyurethane wood glues and PU construction grade adhesives
Wood, parquet, and outdoor carpet adhesives
Thick latex or acrylic latex type tile adhesive. Use only where air drying can take place. Not recommended for exterior applications
Epoxy or Silicone (with primer only)
Double-sided foam adhesive (peel & stick)
Construction grade multi-purpose adhesive or Polyester resin with filler
 

HAND ROLLERS

A hand roller is recommended to remove air between the Classic Stone veneer and substrate. To properly roll out trapped air, start in the middle of a sheet while firmly rolling to the edge. Do not press too hard while rolling as this may cause back-filled areas to push adhesive out and leave an air void. By proper pre-back-filling and using good rolling techniques a solid, hard surface will be achieved.

TROWELS

For best results of adhesive to substrate, a 3/16” notched trowel is recommended. Use a straight trowel for back-filling of voids. Any bumps in the back surface should be sanded flat prior to back-filling. The back of Classic Stone may require a filler type adhesive to backfill or level out voids of the natural stone. It is always best to back-fill or back-butter voids or depressions in the material before application to a substrate.

TILING ,GROUTING & JOINING

Classic Stone can be used to create a tiled effect by leaving a grout joint between cut pieces. Sheets may also be butt-jointed for the look of a smaller seam. Due to the thin nature of Classic Stone a 1/8” to ¼” grout joint will produce better results. Test show the use of water based epoxy and acrylic premixed grout work well to fill between the cut veneers. During the sponge-off process, the epoxy will seal the surface of the Classic Stone as well. These grouts are also available in several colors to match the existing décor. If desired a deeper grout joint can be achieved by removing material just under the grout joint area with a scrapper tool. Modified grout and caulking grout can also be used.

SUBSTRATE

In some indoor and most outdoor applications expansion and contraction must be equal to prevent delimitation. A flexible adhesive may be considered in this case. Concrete and masonry substrates must be at least 28 days old. Hydrostatic pressure conditions and vapour transmission cannot exceed 3 lbs. per 1,000 sq. ft. (1.36 kg per 92.9 m2) per 24 hours using a calcium chloride test, and retained moisture should be less than 2.5%.

COMPOSITION & VARIATIONS

Classic Stone is natural stone veneer laminated to a fiberglass and polyester resin substrate. Since Classic Stone is a natural stone veneer, color and texture variances are not defects within the material, but are inherent to it and part of the natural beauty of quarried materials. Classic Stone cannot be guaranteed to match dye-lot to dye-lot, so it is recommended that orders take into account future maintenance or re-fit possibilities.

UV & TEMPRATURE

The stone surface of Classic Stone, like most stone elements, acts as a UV inhibitor and will resist high sun conditions for years. When adhered to a substrate, Classic Stone will handle thermal contraction and or expansion of most standard construction materials. Classic Stone will handle both high temperatures and freezing without cracking.
 
 
 
           
      
ADDRESS   REACH US   QUICK LINKS INFORMATIONS
Classical Stone
Village Jaisinghpura
Chaksu Jaipur (Raj.)
 
 
E-mail : info@classicalstoneveneer.com
Tel. : +(91) 141 4003799
Mobile. : +(91) 9799502999 , 9829633999
 
 
Company Profile
Mission & Vison
Warranty
Why Choose Us
All Colors
Studio
Site Map
Quality
Application
Branding & Packaging
Benefits
Installation Information
Sizes
Thin Stone History
           
All Rights Reserved @ Classic Stone Disclaimer  Terms & Conditions  | Privacy Policy